Solenoid Actuation Package

Solenoid Actuation Package

Each Fike ProInert Cylinder requires a ProInert Solenoid Actuation Package, P/N IG71-017, for valve activation.

The ProInert Actuation Package contains an electrically activated solenoid valve connected to a rechargeable nitrogen cylinder, that when operated allows pressure from the nitrogen cylinder to flow into the pneumatic actuator on the ProInert valve.

All necessary hoses and fittings are supplied for the connection of the solenoid actuator to the pneumatic actuator of the first cylinder valve of the ProInert system. Fittings are also included to allow connection actuators of multi-row cylinder racks. Also included is a vent valve assembly for connection to the last
pneumatic actuator of the system.

By pneumatically connecting the pneumatic actuators on multiple cylinders, a single ProInert Solenoid Actuation Package can activate up to 60 ProInert discharge valves and a single slave actuation package, P/N IG71-019. The ProInert Actuation Package may be activated electrically or manually. Electrical activation is accomplished via a 24VDC signal from the control panel. To initiate manual activation, remove the locking pin and press down on the manual activation button. Should manual actuation not be required then the manual activation button may be removed and replaced by a blanking plug (supplied separately).

Refer to manual 06-294 for installation and manual 06-321 for recharge.

NOTE: The ProInert Actuation Package MUST be mounted in the bracket provided by
Fike and the bracket MUST be securely anchored in an accessible location where it will not be

Product Snapshot

Electric Solenoid Specification
Nominal Supply Voltage:
Minimun Signal Duration:
2 seconds
Minimum Supervision Current:
Minimum Fire Current:
0.6 Amp
Electrical Connection:
DIN 43650 (Hirshmann)
Operating Temp. Range:
-20ºC to 50ºC

Pressure Switch Specifications
Temperature Limits:
-40ºC to +60ºC
Housing Classification:
Contact Rating:
Normally Closed at > bar. Contacts rated at 5 - 100mA
Electrical Connection:
DIN 43650 Compact (Hirshmann) Supplied with 0.3m cable
Pressure Setting:
120 bar (decreasing)

Nitrogen Cylinder Specifications
Filling Pressure:
160 barg @ 15ºC Refill if pressure drops below 120 bar @ 15ºC
Max. Exposure Temp.
Shipping Number:
TT Marked

No files available

There are no additional options for Solenoid Actuation Package.

Write a review


No Reviews | Be the first person to write a review on this product!