APC Symmetra MW UPS

APC Symmetra MW UPS

Symmetra MW redefines high-power UPS technology as a modular, fault-tolerant UPS in the 400-1600 kilowatt range. Ideal for large data centers, complete buildings, healthcare and other critical facility protection requirements, the Symmetra MW can be scaled for rigorous and changing electrical demands.

Product Snapshot
Power Rating: 400-1600kW
Voltage: 400V 3PH
Frequency: 50 Hz
UPS Model
Part Number
Symmetra MW 400kW Frame, 400V
Symmetra MW 600kW Frame, 400V
Symmetra MW 800kW Frame, 400V
Symmetra MW 1000kW Frame, 400V
Symmetra MW 1200kW Frame, 400V
Symmetra MW 1400kW Frame, 400V
Symmetra MW 1600kW Frame, 400V
  • Provides high availabilty through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
  • Enhances availability by allowing immediate, seamless recovery from isolated module failures.
  • Delivers higher availability through redundant batteries.
  • Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
  • Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
  • Provides notification of changing utility power and UPS conditions.
  • Provides remote management of the UPS over the network.
  • Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Reduces UPS over-sizing costs today by allowing quick upgrades later.
  • Allows additional run time to be quickly added as needed.
  • Increases total power capacity by using multiple UPSs simultaneously.
  • Power the connected equipment with multiple UPSs to increase system redundancy.
  • Provides flexibility of UPS placement in the room and easy access to install cabling to the terminal blocks.
  • Simplifies installation and maintenance while minimizing space requirements.
  • Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
  • Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
  • Maximizes battery performance, life, and reliability through intelligent, precision charging.

No files available

Replacement Battery Packs
Replacement Battery Packs for this product are available. Contact Fusion on 1300 911 365 for more information.
External Battery Modules (EBM)
The APC Symmetra MW UPS series UPS is supported by a very large range of standard and custom battery cabinets. Call Fusion on1300 911 365 to have a specialist configure a battery pack to your requirements.
The APC Symmetra MW UPS series UPS can be augmented with a host of communications cards for most common protocols. Contact Fusion on 1300 911 365 to find out more.
Maintenance Bypass
The APC Symmetra MW UPS has standard Maintenance Bypass Options with the following configurations:
1. Internal bypass
2. External Tail End Bypass switch with interlock
3. Wraparound Maintenance Bypass without separate bypass input, interlocked
4. Wraparound Maintenance Bypass with separate bypass input, interlocked
Contact Fusion on 1300 911 365 to find out more.
Do you have a similar problem? We can help.
Call 1300 191 365 or email support@fusionps.com.au

Think these products may suit an issue you have?
For sales questions and information

Get in touch a member of our helpful sales team:

Call 1300 911 365 (Local call)
For international customers +61 3 8677 5600
Monday – Thursday / 8am – 7pm EST
Friday 8am – 6pm EST

Write a review


No Reviews | Be the first person to write a review on this product!