APC Smart UPS SMC UPS

APC Smart UPS SMC UPS


The APC by Schneider Electric Smart-UPS™ is a high performance uninterruptible power supply (UPS). The UPS provides protection for electronic equipment from utility power blackouts, brownouts, sags, and surges, small utility power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until utility power returns to safe levels or the batteries are fully discharged.

Read the Safety Guide supplied with this unit before installing the UPS.

Adhere to all local and national electrical codes.

This UPS is intended for indoor use only.

Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.

Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.

The battery typically lasts for two to five years. Environmental factors impact battery life. Elevated ambient temperatures, poor quality utility power, and frequent short duration discharges will shorten battery life.

Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.

The batteries are heavy. Remove the batteries prior to installing the UPS in a rack.

Refer to “Specifications” on page 2 for UPS and battery weight.

Product Snapshot
Nominal Input Voltage: 230V
Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections: IEC-320 C14
Input voltage range for main operations: 180 - 287V
Input voltage adjustable range for mains operation: 170 - 300V
Model
Part Number
Max. Height (mm)
Max. Width (mm)
Max. Depth (mm)
Rack Height
Net Weight (kg)
SMC1500I-2U
89
432
457
2U
28.64
SMC1500I
219
171
439
-
24
SMC1000I
215
171
439
-
17.27
SMC1000I-2U
89
432
406
2U
20.52
  • Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • LCD Status Display - Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • High online efficiency - Reduces utlility costs, generates less heat.
  • Cold-start capable - Provides temporary battery power when the utility power is out.
  • Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.

 

Products
Part Number
Interface Cables
Simple Signaling UPS Cable - USB to RJ45
AP9827
Open Frame Racks
NetShelter 2 Post Rack 45U #12-24 Threaded Holes Black
AP9625 
Open Frame Racks
AR201 
AV Power Conditioners & Battery Backups
APC AV Black 1kVA H Type Power Conditioner 120V
H10BLK
APC AV Black 1.5kVA H Type Power Conditioner 120V
H15BLK
APC AV Black 1kVA S Type Power Conditioner with Battery Backup 120V
S10BLK
APC AV Black 1.5kVA S Type Power Conditioner with Battery Backup 120V
S15BLK
APC AV Black Network Manageable 1.25kW S Type Power Conditioner w Battery Backup 120V
S20BLK
Do you have a similar problem? We can help.
Call 1300 191 365 or email support@fusionps.com.au

Think these products may suit an issue you have?
For sales questions and information

Get in touch a member of our helpful sales team:

Call 1300 911 365 (Local call)
For international customers +61 3 8677 5600
Monday – Thursday / 8am – 7pm EST
Friday 8am – 6pm EST
Email
sales@fusionps.com.au

Write a review

security


No Reviews | Be the first person to write a review on this product!