APC Smart-UPS SC Series UPS

APC Smart-UPS SC Series UPS


APC Smart-UPS SC 420VA 230V

APC award-winning Smart-UPS® is the most popular UPS in the world for servers, storage and networks. Trusted to protect critical data and equipment from power problems by supplying clean and reliable network-grade power.

Product Snapshot
Part Number
SC420I
SC450RMI1U
SC620I
SC1000I
SC1500I
Output
Output Power Capacity (Watts / VA):
260 / 420
280 / 450
390 / 620
600 / 1000
865 / 1500
Max Configurable Power (Watts / VA):
260 / 420
280 / 450
390 / 620
600 / 1000
865 / 1500
Nominal Output Voltage:
230V
Output Voltage Distortion:
Less than 5% at full load
Input
Nominal Input Voltage:
230V
Input Frequency:
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections:
IEC-320 C14
Batteries & Runtime
Typical recharge time:
3 hour(s)
5 hour(s)
5.50 hour(s)
8 hour(s)
Replacement Battery:
RBC2
RBC18
RBC4
RBC33
RBC59
RBC™ Quantity:
1
Model
Part Number
Height (mm)
Width (mm)
Depth (mm)
Weight (kg)
SC420I
168
119
368
9.09
SC450RMI1U
44
432
383
10.18
SC620I
168
119
375
12.27
SC1000I
89
432
436
16.36
SC1500I
89
432
463
21.36
  • Battery-protected and surge-only outlets - Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment.

APC Smart-UPS SC SERIES Features & Benefits

Availability

  •  Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability by correcting low and high voltage conditions without using the battery.
  • Intelligent battery management - Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Power conditioning - Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic restart of loads after UPS shutdown - Automatically starts up the connected equipment upon the return of utility power.
  • Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Cold-start capable - Provides temporary battery power when the utility power is out.
  • Disconnected battery notification - Warns when a battery is not available to provide backup power.

Manageability

  • Network manageable - Provides remote management of the UPS over the network.
  • Audible alarms - Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
  • LED status indicators - Quickly understand unit and power status with visual indicators.
  • Serial Connectivity - Provides management of the UPS via a serial port.
  • USB connectivity - Provides management of the UPS via a USB port (not available on all models).
  • Disconnected battery notification - Warns when a battery is not available to provide backup power. 

Serviceability

  • User-replaceable batteries - Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Predictive failure notification - Provides early-warning fault analysis ensuring proactive component replacement.
  • Resettable circuit breakers - Enables a quick recovery from overload events. 

Adaptability

  • Adjustable voltage-transfer points - Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Adjustable voltage sensitivity - Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Field-replaceable power distribution panel - Ensures compatibility with equipment that has different plug types. 

Safety

  • Safety-agency approved - Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Please see available files below:

Smart-UPS SC Series User-Manual

Replacement Batteries

Description Part Number
Replacement Batteries
APC Replacement Battery Cartridge #2 RBC2
Extended Warranty
 1 Year Extended Warranty WEXTWAR1YR-SB-10
 3 Year Extended Warranty WEXTWAR3YR-SB-10
Do you have a similar problem? We can help.
Call 1300 191 365 or email support@fusionps.com.au

Think these products may suit an issue you have?
For sales questions and information

Get in touch a member of our helpful sales team:

Call 1300 911 365 (Local call)
For international customers +61 3 8677 5600
Monday – Thursday / 8am – 7pm EST
Friday 8am – 6pm EST
Email
sales@fusionps.com.au

Write a review

security


No Reviews | Be the first person to write a review on this product!