APC MGE Sinewave Harmonic Filters

APC MGE Sinewave Harmonic Filters


_x000D_ By neutralizing harmonics, SineWave eliminates nuisance tripping of _x000D_ circuit breakers and premature aging of equipment. SineWave is _x000D_ extremely compact and can be mounted on a wall or installed in a _x000D_ switchgear cubicle. It can also be connected in parallel, allowing _x000D_ future increase in power demand without disconnecting the supply. _x000D_ SineWave adapts automatically to any single-phase or three-phase load._x000D_

Product Snapshot



System input
Nominal voltage(2):
400 V – 20 +15%
Nominal frequency:
50 Hz , 60 Hz, +/- 8%
Current transformers:
range from 300/1 to 4000/1
Number of phases:
3 phases with or without neutral (operation is possible with single-phase or unbalanced loads)


Technical characteristics
Compensated harmonic currents:
H2 to 25, full equalization or individual equalization
Correction of Cos ø:
lagging or leading, up to 1.0
Response time:
< 40 ms
Overload:
Limitation of the nominal current, possibility of continuous operation with current limitation
Inrush current:
< 2 x the nominal peak current
Color:
RAL 9002
Harmonic attenuation rate:
THDI load /THDI system less than 10, at the nominal rating of the equalizer

Models

Model
Compensation capacity per phase (A rms)
Compensation capacity in the neutral(1) (A rms)
Heat losses (W)
Acoustic noise (ISO 3746) (dBA)
SW20
20
60
1000
<55
SW30
30
90
1300
<55
SW45
45
135
2100
<60
SW60
60
180
2600
<60
SW90
90
270
4200
<65
SW120
120
360
5200
<65

No files available

_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
Associated communication
JBus/ModBus cardTo connect the SineWave to a buildingmanagement system.
Status information cardTo relay the status of the SineWave via 3 volt free contacts.

Write a review

security


No Reviews | Be the first person to write a review on this product!